广州毅翚金属加工机械有限公司

SCM Series Automatic Wire Straightening and Cutting Machine

设备主要特点

1.该设备主要用于将圆或扁的铁线，不锈钢线，镀锌线，铝线，铜线等自动调直，按照设定长度，自动切断。

2.有传统机械式和数控液压式两种。

3.机械式铁线调直切断机，手动设定调直切断长度，操作与维护都比较简单。主要是用于调直切断直径小于10毫米,最大切断长度小于2米的普通铁线。

4.数控液压式铁线调直切断机，加工性能较强，几乎可以加工任何直径，任何长度的铁线，自动化程度高，数控设定调直切断长度，并设有安全装置，自动计数停机系统。主要用于调直切断建筑用冷轧螺纹钢筋、热轧钢筋、热轧圆钢及冷轧圆钢等。

Main Application and Characteristic

1.The equipment is mainly used for automatically straighten round or flat wire, stainless steel wire, galvanized wire, aluminum wire, copper wire,and cut automatically according to the preset length.

2.There are two kinds of models:Traditional Mechanical Model and Numerical Control Hydraulic Model.

3.“Traditional Mechanical Model Automatica Wire Straightening and Cutting Machine”,need to set the straightening and cutting length manually,then the machine will do that automatically.

Operation and maintenance are simple. It is mainly used for straightening and cutting the wire with diameter less than 10 mm and the maximum cutting length is less than 2 metres.

4.“Numerical Control Hydraulic Model Automatica Wire Straightening and Cutting machine”,processing performance is strong, almost can process any diameter, any length of wire, high degree of automation,automatically set straightening and cutting length,adopted with the safety device and automatic counting & stop system.Mainly used for straightening and cutting building cold-rolled steel wire and rebar, hot-rolled steel wire, hot-rolled round steel wire and cold-rolled steel bar etc..

技术参数

Technical Parameter